Your Local Sunburst Dealer

What decisions are there when ordering interior shutters?

What decisions are there when ordering interior shutters?

There are so many options when ordering custom-made shutters. Find out what you need to know when ordering shutters.

1st Choice: Louver Size 

There are three main louver sizes being used today: 2 1/2″ , 3 1/2″ , and 4 1/2″

 

2 1/2 inch louver

2/2 inch louver interior shutter

3 1/2 inch louver

3 /12 inch louver interior shutter

4 1/2  inch louver

4 1/2 inch louver interior shutter.

 

The larger you go the more light you let illuminate the room and the more you can see out. TIP- With furniture and fixtures in the way, it is rare that you will always open up the doors to let light in or to see out. You will most likely be tilting the louvers to look out and at that point the larger the louver the more you can see through the shutters. 

There is no right or wrong to any of these decisions.  It is a matter of personal preference. We have seen customers choose louver size based on the scale of the window or the look they are trying to achieve – traditional, modern, contemporary, etc. You pick what is best for you and your home.

2nd Choice: Divider Rails or Double-Hung

A divider rail allows you to close the top louvers separate from the bottom. It is still one panel from top to bottom, just separate controls.

Divider Rails

Graber Composite Shutters - Bathroom

Double Hung Panels

What to know about shutters with double hung panels

 

TIP – This choice can help you decide what louver to choose.  Keep in mind a big louver on a small window by itself is fine. Adding a divider may look out of scale, giving you only a couple louvers top and bottom. 

 

Basic Shutter Design

 

Double Hung is not only separate controls top and bottom but also separate doors as well.

What to Know About Shutters with Double Hung Panels

TIP:  Keep in mind that the center break is much larger on a double hung than a divider rail. Since the basic concept of a plantation shutters is that you can simply tilt the louvers to see out… it is very rare that you will open the doors and leave them open.  That being said, if you have furniture up against the window it may be hard to gain access to the window with just a divider rail. Double hung panels will allow you to open the panels on top without moving the furniture.

 

 

3rd Choice: Rod or No-Rod

You can choose from the classic look of  the traditional tilt-rod in the center or the sleek design of a hidden rod system.

 

Traditional Tilt Rod

Shutters with Traditional Tilt Rod

Hidden Rod

Shutters with Hidden Rod

Off-Set Rod

Shutters with Offset Tilt Rod

Tip: The traditional tilt rod is the classic look of a shutter and, to many customers, it is what a shutter should look like. However, the hidden rod is one less line in the window. Today, new windows or replacement windows have the window grids (muntins) in between the glass that you can not take out anymore like the old wooden ones.Therefore, the tilt-rod does not always line up with those grids and creates busy lines in the window. A hidden rod or off-set rod may be less cluttered and more pleasing to the eye.

What to know about Mounting Window Shutters

4th Choice – Mounting

 

Typically, with all shutters you will see some type of frame used for mounting.

Shutter with Casing Frame

You do not have to use a frame, but it is always recommended. Shutter frames give a more finished look to the edge of the panels and hide many inconsistencies of your windows, drywall, and trim.

Shutter Frame Shutter Frame Shutter Frame Shutter Frame

OUTSIDE MOUNTS are VERY POPULAR for many reasons. Newer windows tilt in for cleaning and removing screens. If you mount inside the window with a frame it will block this feature. The window will hit the back of the frame while tilting and you will not be able to remove your screens.

     Outside-mount frame on drywallTilting Window for CleaningWhite Window Shutter

 

Don’t worry if you have trim around your windows already. We don’t need to cover it up. We can simply add to it and make it even more ornate and dimensional.

       Shutters with Outside Trimdecorative frame on top of trim

 

If you had your heart set on an inside mount but don’t want to loose the ability to tilt in your windows – we can do a direct mount.

Graber direct mount shutters

Just keep in mind, with a frame we can caulk around the edges and hide the out-of-squareness of the window. Without a frame, you are at the mercy of the construction of that same window. The uneven light gaps may be visible and could drive some homeowners crazy.

direct mount window shutterDirect mount shutter

 

Nevertheless, if you don’t mind small inconsistencies this mount is very effective in achieving a flush mount without blocking the tilt-in windows.

5th Choice : Product

 

Normandy Logo NormanTeak Logo PhoenixWood IconGRABER_BLK_HghResOvation by Sunburst LogoPolywood logoWoodlore Icon Woodlore Plus IconHD_Logo_Grey_jpg Sunburst Logoblacknorman

 

With plantation shutters being the hottest thing in window coverings today, there so many different products; Synthetic, Faux-Wood, Composite, Polymer, Bass-Wood, Teak-Wood, etc, etc. Which one is the right one for you? What is the warranty? What are the limitations? What colors are available?

Check out our Products Page to help you decide which product is best for you.

 

 

 

 

 

 

Comments are closed

Let's get social on Twitter and Facebook!